特性/ Features
Tg:≥135℃ (DSC)
UV Blocking与 AOI兼容可提高PCB生产效率
UV Blocking and AOI compatible,so as to increase productivity efficiency
优异的耐热性,Td ≥325℃,T288≥5min ,适合于无铅焊工艺;
High thermal performance,Td ≥325℃ ,T288≥5min,suitable for lead-free process。
主要特性 / General properties
检测项目 Item | 单位 Unit | 检测条件 Test Condition | 规范值 Spec | 典型值 Typical Value | |
玻璃化转变温度Tg | ℃ | DSC | ≥135℃ | 141.3 | |
剥离强度 1oz Peel Strength | N/mm | 288℃, 10S | ≥1.05 | 1.32 | |
热应力 Thermal stress | S | 288℃,solder dip | >10 | 180 s No delamination | |
弯曲强度 Flexural Strength | N/mm2 | 经向 LW | ≥415 | 580 | |
纬向CW | ≥345 | 485 | |||
燃烧性Flammability | - | E 24/125 | UL94V-0 | V-0 | |
表面电阻Surface Resistivity | MΩ | After moisture | ≥1.0×104 | 5.16×107 | |
体积电阻VolumeResistivity | MΩ·cm | After moisture | ≥1.0×106 | 5.07×108 | |
介电常数 Dielectric Constant | - | C 24/23/50 | ≤5.4 | 4.8 | |
介质损耗角正切 Loss Tangent | - | C 24/23/50 | ≤0.035 | 0.017 | |
耐电弧Arc Resistance | S | D48/50+D0.5/23 | ≥60 | 125 | |
击穿电压 Dielectric Breakdown | KV | D48/50+D0.5/23 | ≥40 | 58 | |
吸水率Moisture Absorption | % | D24/23 | ≤0.35 | 0.08 | |
热分解温度Td | ℃ | Weight Loss 5% | ≥325 | 340 | |
CTE Z-axis | Alpha 1 | ppm / ℃ | TMA | ≤60 | 46 |
Alpha 2 | ppm / ℃ | ≤300 | 260 | ||
50 - 260 ℃ | % | ≤4.0 | 3.8 | ||
T288 | min | TMA | ≥5 | 20 | |
相比漏电起痕指数 CTI | V | IEC-60112 | 175~250 | 200 |
Specimen Thickness : 1.6mm ;
Specification sheet:IPC-4101C/101,is for your reference only
Explanation: C: Humidity conditioning;
D: Immersion conditioning in distilled water ;
应用领域/ Applications
适合于多层PCB、计算机及外围设备、通讯设备、办公自动设备、PCB无铅制程等。
Suitable for medium multilayer printed circuit board, computer, communication equipment, OA equipment,
lead-free PCB process etc.
产品系列 / Purchasing information
厚度Thickness | 铜箔Copper foil | 标准尺寸 Standard size |
0.10~3.2mm | 12um ~ 105um | 37"×49"、41"×49"、43"×49" |
半固化片介绍/ Prepreg instruction
prepreg type | Resin Content(%) | Gel Time (sec/171℃) 胶化时间 | Resin Flow 流动度 | 压合厚度Cured thickness(mm/mil) | ||||
R/C(%)含量 | Tolerance公差 | Nominal | Range(±)mil | |||||
% | ± | S | % | mm | mil | mm | mil | |
7628HRC | 52 | 2 | 120±20 | 30±5 | 0.231 | 9.09 | 0.022 | 0.85 |
50 | 2 | 120±20 | 29±5 | 0.22 | 8.66 | 0.022 | 0.85 | |
48 | 2 | 125±20 | 28±5 | 0.21 | 8.27 | 0.020 | 0.8 | |
7628 | 45 | 2 | 125±20 | 24±5 | 0.195 | 7.68 | 0.019 | 0.75 |
43 | 2 | 130±20 | 22±5 | 0.186 | 7.32 | 0.018 | 0.7 | |
1506 | 48 | 2 | 130±20 | 29±5 | 0.164 | 6.46 | 0.017 | 0.65 |
45 | 2 | 130±20 | 28±5 | 0.153 | 6.02 | 0.015 | 0.6 | |
2116 | 58 | 2 | 135±20 | 35±5 | 0.136 | 5.35 | 0.014 | 0.55 |
57 | 2 | 135±20 | 35±5 | 0.132 | 5.20 | 0.013 | 0.5 | |
55 | 2 | 135±20 | 33±5 | 0.125 | 4.92 | 0.013 | 0.5 | |
53 | 2 | 140±20 | 31±5 | 0.119 | 4.69 | 0.011 | 0.45 | |
50 | 2 | 140±20 | 29±5 | 0.11 | 4.33 | 0.011 | 0.45 | |
1080 | 68 | 2 | 135±20 | 44±5 | 0.086 | 3.39 | 0.008 | 0.3 |
65 | 2 | 135±20 | 42±5 | 0.077 | 3.03 | 0.008 | 0.3 | |
63 | 2 | 140±20 | 39±5 | 0.073 | 2.87 | 0.008 | 0.3 |